The Zycoo SQ Series Square Basic Network Speaker is a comprehensive, high performance SIP enabled Speaker. It has a built-in Microphone enabling full duplex two way speech at anytime, anywhere. These units are perfect for many scenarios such as classrooms, libraries, offices etc. Flush and surface mount options available to meet various installation aesthetics.
 |
320Kbps MP3 Music Files and Streamed Media Music Audio Quality supported. Click to play music, immediate announcement, intercom, schedule music and paging supported. |
 |
Integrated Microphone allowing for half duplex or full duplex paging based on platform used. When used with an external pushbutton it can call to a predetermined extension or trigger an assigned task such as an emergency alert etc. |
 |
The SQ10 series supports PoE+ making it easy to connect to a network without the addition of power supply cables to power the unit. |
 |
The speakers support standard SIP Protocol enabling it to be registered to any third-party SIP Server such as an IPBX or Public Address System. |
 |
Supporting peripheral integration the SQ10 can connect to strobes, call buttons, volume controllers, external LED/LCD monitors, door magents etc. |
 |
Four additional knockout holes are implemented along each side of the enclosure allowing cables to enter from any direction. |
| Speaker | |
| Size | 4.5 inch |
| Average Sensitivity | 91dB/1m/1Watt |
| Frequency Response | 70Hz ~ 20kHz |
| THD | <0.1% |
| Max SPL @ 1m (Passive) | 101dB |
| Amplifier | Single Channel Class-D Topology |
| Rated Power | 8ohms 10Watts |
| Coverage Pattern | 90 |
| Audio | |
| Network Audio | G.722, G.711 A-law, G.711 U-Law, OPUS |
| Network | |
| Ethernet | IEEE 802.3 10/100Base-T |
| PoE | IEEE 802.3at Compliant |
| Supported Protocols | SIP(RFC3261), HTTP,TCP/IP, SSL, DNS, SNTP, NTP, RTSP, RTP, RTPC, TCP, UDP, MQTT, ICMP, DHCP |
| IP Addressing | DHCP / Static |
| Mechanical Properties | |
| Memory | 128MB RAM, 256MB Flash |
| Power Input | PoE+ or External 24Vdc |
| Casing Material | Cold Rolled steel with textured white epoxy finish |
| Mounting method | Wall Mounted Surface and Flush options |
| Colour | White |
| Weight | 3.15kg |
| Dimensions - Surface Mount | 280 x 280 x 65mm |
| Dimensions - Flush Mount | 300 x 300 x 65mm |
| SYS Light Status | On/Off/Flash |
| PWR Light Status | On/Off/Flash |
| RST Key | Press and hold for 3 seonds to announce IP Address Press and hold for 10sec to reset to factory default |
| Environmental | |
| Installation Environment | Indoor |
| Operating Temperature | -20dC ~ 50dC |
| Storage Temperature | -40dC ~ 70dC |
| Humidity | 10% - 95% RH Non-condensing |
| Approvals | |
| Approvals | EN 55032:2015, EN 55035:2017, EN 61000-3-2:2014' EN 61000-3-3:2013, EN 62368-1:2014+A11:2017, FCC Part 15B Class A |
