,

Akubela Zigbee Relay

1-Channel Dry Contact Switch

  • Compact size, easy to install and hide
  • Dry contact control output
  • Wide voltage design, suitable for a wide range of applications

Add to wishlist
,

CBW - 4 Relay C / SPDT Expansion Module

The ControlByWeb X-21s is a Four Relay Expansion Module and is used with an X-400 or X-600M network based controller. These are connected to one of the controllers via a BUS cable upon which a number of units can be connected to form a common IP Based unit.  The CBW X-21s has four relays each with Form-C / SPDT contacts (independently controlled). It has LED indicators for relay and power status. It is powered through expansion bus - no separate power supply connections are required. Allows to connect one or more X-21s expansion modules to an X-400 / X-600M controller with a CBW expansion Bus cable.

Add to wishlist
,

Expansion Module 10 High Current Relays

The ControlByWeb X-18S™ Relay expansion module is used with an X-400™ or X-600M™ controller. The unit has 10 high-current (HC) relays (rated 15Amp), each with Form-C contacts (SPDT). Wiring connections are made directly to the relays using 1/4″ tab terminals.

  • 10 High Current Relays
  • Expansion Module for the X-400 and X-600M

Add to wishlist
,

Expansion Module 4 Relays 4 Inputs

The ControlByWeb X-17S™ expansion module is used with either the X-400™ or X-600M™ controllers. The 4 onboard relays have Form-A contacts (SPST) and can be used to control moderate loads. Each input is optically isolated and allows the grounding system of equipment and the low-voltage circuits of the X-17S to be electrically separate. One or more X-17S expansion units can be connected with a ribbon cable that provides both power and communications via the BUS.

  • 4 Relays
  • 4 Digital Inputs
  • Expansion Module for the X-400 and X-600M

Add to wishlist
,

Expansion Module 6 Relays 6 Digital Inputs

The ControlByWeb X-20S™ expansion I/O module is used either with an X-400™ or X-600M™ controller. It has six high-current relays, each with Form-C contacts (SPDT), and six optically isolated digital inputs. Screw terminal strips provide connections to the relays.

  • 6 Isolated HC Relays
  • 6 Digital Inputs
Expansion Module for the X-400 and X-600M

Add to wishlist
,

Expansion Module 8 Relays

The ControlByWeb X-12s™ is an eight-relay expansion module and is used with an X-400™ or X-600M™ controller. The relays are 2.5A Form-A (SPST) with commons tied together in two groups. The removable terminal connector provides connections to the relays. One or more X-12s expansion modules can be connected with a ribbon cable that provides both power and communication via the BUS.
8 Relays Expansion Module for the X-400 or X-600M

Add to wishlist
,

Expansion Module Dual Relay High Current

The ControlByWeb X-11S™ is a two-relay expansion unit that is used with an X-400™ or X-600M™ master controller. The two relays are 20A Form-C (SPDT) and are wired through robust, high-current terminals. One or more CBW X-11S expansion modules can be connected with a ribbon cable that provides both power and communication via the BUS.
2 High-Current Relays Expansion Module for the X-400 or X-600M

Add to wishlist
,

Web Enabled Advanced logic Controller 4Relays 4Inputs

Simplify your industrial application with the ControlByWeb X-410™—no coding is necessary. Automation is easy with its web browser-based interface and intuitive drop-down menus for creating event-based and scheduled logic profiles. Monitor dry contacts and control relays with built-in I/O. Extend the functionality by adding other ControlByWeb devices with P2P (Peer-2-Peer) communications.
4 Relays & 4 Digital Inputs Up to 16 Temperature Sensors Ethernet, Cellular, or WiFi 9-28VDC and/or POE

Add to wishlist
,

Web Enabled Dual Relay and Input Module 9-28Vdc

The ControlByWeb X-401™ with 9-28Vdc power input has two SDPT relays (form C) and two optically isolated inputs. It also shares the same benefits as the other 400 series devices, which include a built-in web server and a simple, no-code logic builder. With the the ability to Monitor locks, lights and gate Open/Closed, reboot devices like IP cameras, control bells and alarms, and much more.
2 Relays & 2 Digital Inputs Ethernet or WiFi Versions 9-28VDC

Add to wishlist
,

Web Enabled Dual Relay and Input Module 9-28Vdc/PoE

The ControlByWeb X-401™ with PoE and/or 9-28Vdc power input has two SDPT relays (form C) and two optically isolated inputs. It also shares the same benefits as the other 400 series devices, which include a built-in web server and a simple, no-code logic builder. With the the ability to Monitor locks, lights and gate Open/Closed, reboot devices like IP cameras, control bells and alarms, and much more.
2 Relays & 2 Digital Inputs Ethernet or WiFi Versions available 9-28VDC and/or POE

Add to wishlist
,

Web Enabled Instrumentation Grade data 4 analog 2 Digital

The ControlByWeb X-420 offers great flexibility of configurable digital I/O, along with 4 analog inputs. It’s a good fit for applications like boiler room, generator, and greenhouse monitoring.

Add to wishlist
,

Web Enabled PoE 4 A/D In + 2 I/O upto 16 1 wire se

The ControlByWeb X-420™ PoE version features software-programmable digital I/O that can be assigned as an input or an output.
4 Analog Inputs 2 Digital I/O Up to 16 Temperature Sensors

Add to wishlist