Analogue Input Module 8 Inputs PoE
CBW - 4 Relay C / SPDT Expansion Module
The ControlByWeb X-21s is a Four Relay Expansion Module and is used with an X-400 or X-600M network based controller. These are connected to one of the controllers via a BUS cable upon which a number of units can be connected to form a common IP Based unit. The CBW X-21s has four relays each with Form-C / SPDT contacts (independently controlled). It has LED indicators for relay and power status. It is powered through expansion bus - no separate power supply connections are required. Allows to connect one or more X-21s expansion modules to an X-400 / X-600M controller with a CBW expansion Bus cable.
CBW - 8 Channel Analogue Input Expansion Module
- 8 Analog Inputs
- Expansion Module for the X-400™ or X-600M™
ControlByWeb 1wire Bus Water Sensor 5Vdc/10mA
- Relay Contact, Normally Closed for a Closed Loop Circuit, 5 VDC from Controller 1-wire Bus
- Will Detect Any Conductive Non-Flammable Liquid
- Automatic Reset
- 6 Foot Jacketed Lead Standard
- Detects liquids of 1/16″ in depth
Digital Temperature & Humidity Sensor - Wall Mount
- Temperature Range: -40°F to +149.9°F (-40°C to 65.5°C)
- Temperature Accuracy: ±0.5°C (from -10°C to 65.5°C)
- Type: Digital 1-Wire (Maxim Semiconductor DS18B20)
- Dimensions: 2 3/4″ x 2 3/4″ x 1″
DIN-Rail Mounting Kit For X-332™ and X-432™
For use with the new ControlByWeb X-432 and the old X-332 only (Hardware included)
Expansion Module 10 High Current Relays
The ControlByWeb X-18S™ Relay expansion module is used with an X-400™ or X-600M™ controller. The unit has 10 high-current (HC) relays (rated 15Amp), each with Form-C contacts (SPDT). Wiring connections are made directly to the relays using 1/4″ tab terminals.
- 10 High Current Relays
- Expansion Module for the X-400 and X-600M
Expansion Module 16 Digital 4 Analogue Inputs
The ControlByWeb X-19S™ expansion module is used either with an X-400™ or X-600M™ controller. The X-19S has 16 relays, 16 optically-isolated digital inputs, and 4 analogue inputs. Screw terminal strips provide connections to the relays and inputs. The X-19S can also be coupled with expansion modules to have more end points.
- 16 Relays
- 16 Digital Inputs
- 4 Analogue Inputs
Expansion Module 2 x K Thermocouples
Expansion Module 4 Relays 4 Inputs
The ControlByWeb X-17S™ expansion module is used with either the X-400™ or X-600M™ controllers. The 4 onboard relays have Form-A contacts (SPST) and can be used to control moderate loads. Each input is optically isolated and allows the grounding system of equipment and the low-voltage circuits of the X-17S to be electrically separate. One or more X-17S expansion units can be connected with a ribbon cable that provides both power and communications via the BUS.
- 4 Relays
- 4 Digital Inputs
- Expansion Module for the X-400 and X-600M
Expansion Module 6 Relays 6 Digital Inputs
The ControlByWeb X-20S™ expansion I/O module is used either with an X-400™ or X-600M™ controller. It has six high-current relays, each with Form-C contacts (SPDT), and six optically isolated digital inputs. Screw terminal strips provide connections to the relays.
- 6 Isolated HC Relays
- 6 Digital Inputs
