,

Analogue Input Module 8 Inputs

The ControlByWeb X-418™ is a web-enabled analog module with 8 configurable analog-to-digital inputs. The great choice for sensor monitoring of tank/bin level, pressure, flow, current, and more.
8 Analog Inputs (multi-function) ±1.28V, ±2.56V, ±5.12V, ±10.24V 4-20mA (Inputs 1-4 only)

Add to wishlist
,

Analogue Input Module 8 Inputs PoE

The ControlByWeb X-418™ PoE version is a web-enabled analog module with 8 configurable analog-to-digital inputs. The great choice for sensor monitoring of tank/bin level, pressure, flow, current, and more.
8 Analog Inputs (multi-function) ±1.28V, ±2.56V, ±5.12V, ±10.24V 4-20mA (Inputs 1-4 only)

Add to wishlist
,

CBW - 4 Relay C / SPDT Expansion Module

The ControlByWeb X-21s is a Four Relay Expansion Module and is used with an X-400 or X-600M network based controller. These are connected to one of the controllers via a BUS cable upon which a number of units can be connected to form a common IP Based unit.  The CBW X-21s has four relays each with Form-C / SPDT contacts (independently controlled). It has LED indicators for relay and power status. It is powered through expansion bus - no separate power supply connections are required. Allows to connect one or more X-21s expansion modules to an X-400 / X-600M controller with a CBW expansion Bus cable.

Add to wishlist
,

CBW - 8 Channel Analogue Input Expansion Module

The ControlByWeb X-22S™ is an eight-analog-input expansion module to be used with an X-400™ or X-600M™ controller via the BUS expansion cable. It has eight precision analog inputs that can be configured for various voltage ranges and 4-20mA sensors.
  • 8 Analog Inputs
  • Expansion Module for the X-400™ or X-600M™

Add to wishlist
,

Expansion Module 10 High Current Relays

The ControlByWeb X-18S™ Relay expansion module is used with an X-400™ or X-600M™ controller. The unit has 10 high-current (HC) relays (rated 15Amp), each with Form-C contacts (SPDT). Wiring connections are made directly to the relays using 1/4″ tab terminals.

  • 10 High Current Relays
  • Expansion Module for the X-400 and X-600M

Add to wishlist
,

Expansion Module 16 Digital 4 Analogue Inputs

The ControlByWeb X-19S™ expansion module is used either with an X-400™ or X-600M™ controller. The X-19S has 16 relays, 16 optically-isolated digital inputs, and 4 analogue inputs. Screw terminal strips provide connections to the relays and inputs. The X-19S can also be coupled with expansion modules to have more end points.

  • 16 Relays
  • 16 Digital Inputs
  • 4 Analogue Inputs
Expansion Module for the X-400 and X-600M

Add to wishlist
,

Expansion Module 2 x K Thermocouples

The ControlByWeb X-13S™ thermocouple expansion module is for use with the X-400™ or X-600M™ master controller. It has a 2-channel signal conditioner for Type-K thermocouples. One or more X-13S expansion units can be connected with a ribbon cable that provides both power and communication via the BUS.
2 Channel Type-K Thermocouples Expansion Module for the X-400 and X-600M

Add to wishlist
,

Expansion Module 4 Relays 4 Inputs

The ControlByWeb X-17S™ expansion module is used with either the X-400™ or X-600M™ controllers. The 4 onboard relays have Form-A contacts (SPST) and can be used to control moderate loads. Each input is optically isolated and allows the grounding system of equipment and the low-voltage circuits of the X-17S to be electrically separate. One or more X-17S expansion units can be connected with a ribbon cable that provides both power and communications via the BUS.

  • 4 Relays
  • 4 Digital Inputs
  • Expansion Module for the X-400 and X-600M

Add to wishlist
,

Expansion Module 6 Relays 6 Digital Inputs

The ControlByWeb X-20S™ expansion I/O module is used either with an X-400™ or X-600M™ controller. It has six high-current relays, each with Form-C contacts (SPDT), and six optically isolated digital inputs. Screw terminal strips provide connections to the relays.

  • 6 Isolated HC Relays
  • 6 Digital Inputs
Expansion Module for the X-400 and X-600M

Add to wishlist
,

Expansion Module 8 Relays

The ControlByWeb X-12s™ is an eight-relay expansion module and is used with an X-400™ or X-600M™ controller. The relays are 2.5A Form-A (SPST) with commons tied together in two groups. The removable terminal connector provides connections to the relays. One or more X-12s expansion modules can be connected with a ribbon cable that provides both power and communication via the BUS.
8 Relays Expansion Module for the X-400 or X-600M

Add to wishlist
,

Expansion Module 8 x Analogue Inputs

The ControlByWeb  X-16S™ is an eight-analog-input expansion module is designed to be used with an X-400™ or X-600M™ controller. It employs a 24-bit A/D converter and can make single or differential input measurements. A 5.0V reference output can be used to power potentiometers and other resistance-sensing sensors. One or more X-16S expansion modules can be connected with a ribbon cable that provides both power and communication.
8 Analog InputsExpansion Module for the X-400 or X-600M
Recommended - Use the updated X022s™ Model
Configurable Analog Inputs: ±1.28V, ±2.56V, ±5.12V, ±10.24V, 4-20mA

Add to wishlist
,

Expansion Module 8 x Digital Inputs

The ControlByWeb X-15S™ eight-digital-input expansion unit is designed to be used with an X-400™ or X-600M™ controller. All inputs are optically isolated and allow the grounding system of equipment and the low-voltage circuits of the X-15S to be electrically separate. One or more X-15S expansion units can be connected with a ribbon cable that provides both power and communication via the BUS.
8 Digital Inputs Expansion Module for the X-400 or X-600M

Add to wishlist