Web Enabled PoE Adv Logic Controller 4 Relays 4 In
4 Relays & 4 Digital Inputs
Up to 16 Temperature Sensors
Ethernet, Cellular, or WiFi
9-28VDC and/or POE
- Description
- Features and Applications
- Specifications
- Downloads
- Media
Description
The ControlByWeb X-410-E Versatile, Easy Monitoring & Control
The ControlByWeb X-410-E is one of the most versatile PLCs. It can monitor up to 4 contacts and control up to 4 relays. This combination has proven to be very popular and extraordinarily flexible.
X-410W: WiFi-Enabled Remote Monitoring
When you are unable to provide a hardwired Ethernet connection, WiFi connectivity now allows you to easily monitor and control your I/O units wirelessly. With the built-in WiFi capability of the X-410W it allows you to create logic, monitor inputs, and trigger relays through a standard web browser and WiFi network. (Note: an initial Ethernet connection is required for setup of 400 Series WiFi devices.)
The Benefits of WiFi PLCs
- Flexibility: WiFi-enabled PLCs are often used when a hardwired Ethernet connection isn’t feasible.
- Cost: With WiFi, integrators can avoid the expense of burying a line, channeling Ethernet cables, and installing other physical components.
- Ease of Installation: Our WiFi-enabled PLCs can be assigned network credentials through the built-in interface.
Built-In No-Code Programming
The ControlByWeb X-410 modules come with a built-in web interface, making your programming a breeze. No more complicated ladder diagrams – just simple “if-this-then-that” type of logic programmed with drop-down menus.
You can now easily create tasks based on time, input or outputs’ status, and device responsiveness. Create up to three actions for each task providing you with the ultimate control and monitoring solution for your application!
Create up to 50 Scheduled Tasks, 50 Conditional Tasks, 16 Auto Reboot Tasks, and 20 Override Schedules with ease.
The X-410 Features
- Email Notifications
- Real-Time Clock with NTP server synchronization
- No-Code Logic Builder
- Peer-to-Peer Communication
- Data Logging
- 400 Series Platform
The X-410 Applications
- Door & Access Control
- Network Device Rebooting
- Alarm Panel Monitoring
- Motor Control
Power Requirements
- Voltage:
- X-410-I: 9-28 VDC
- X-410-E: POE and/or 9-28VDC
- X-410W-I: 9-28VDC
Max Current: 240mA
Relay Contacts
- Number of Relays: 4
- Max Voltage: 28VAC, 24VDC
- Max Current: 1A
- Contact Type: SPST (Form A) All Relays have a shared common
- Load Type: General Purpose
- Contact Resistance: 1 milliohm max
- Contact Material: AgNi
- Electrical Life: 100K operations (Min)
- Mechanical Life: 5M cycles (Min)
- Environmental Rating: Over voltage Category II, Pollution Degree 2
- Relay Modes: ON/OFF or Pulsed
- Pulse Timer Duration: 0.1 to 86,400 Seconds (1-day)
Digital Inputs
- Number of Inputs: 4
- Type: Optically-Isolated
- Voltage Range: 4-26VDC
- Current: 950uA @ 4V, 8.5mA @ 26V
- Minimum Hold Time: 20ms
- Input Functions: Monitor State, Control Relays, Control Remote Relays, Scalable Counter, On Timer, Total On Timer, Frequency
- Maximum Count: 24-bit
- Max Count Rate: 200Hz Max (Dependent on Configuration)
- Edge Trigger: Rising, Falling or Both
Temperature Sensors
- Maximum Number of Sensors: 16
- Type: Digital 1-Wire (Maxim Semiconductor DS18B20)
- Temperature Range: -67°F to 257°F (-55°C to +125°C)
- Accuracy: ±0.5°C (from -10°C to +85°C)
- Sensor Functions: Monitor Temperature, Log Temperature, Email Alerts, SNMP Traps
- Humidity Type: ControlByWeb Model X-DTHS-P sensor
- Humidity Range: 0-100% RH
- Accuracy: ±2%
- Max Cable Length: 600 feet (180m) maximum combined cable length
Real-Time Clock
- Manual or NTP(Network Time Protocol) setup
- NTP Sync Period: Once, Daily, Weekly, On Powerup
- Auto Daylight Savings Adjustment
- Battery (capacitor) Power Backup
Capacitor Power Backup
- Backup Functions: Retain Real-Time Clock, 1 Register, 2 Counters, 4 Relay States
- Backup Duration: 24 hours
Network
- Type: 10/100 Base-T Ethernet Port
- Setup: Static or DHCP IP address configuration
- Wireless: WiFi Communication (X-410W model only)
- Cellular: Cellular Modem (X-410CW model only)
Connectors
- Power, Outputs, and Inputs: 14-Position, 3.81mm, Removable
- Network: 8-pin RJ-45
- Cell Antenna: Male SMA Connector (X-410CW model only)
LED Indicators
- Number of LEDs: 11
- Power on
- Relay coil energized 1-4
- Digital Inputs 1-4
- Network linked
- Network activity
Wireless
- Network Standards: IEEE 802.11 b/g/n
- Frequency Band: 2.412 – 2.462 GHz
- Wi-Fi Security Standards: WPA2, WPA3
- Network Settings: DHCP or Static
Physical
- Operating Temperature: -40°F to 150°F (-40°C to 65.5°C)
- Size:
- 1.41in (35.7mm) wide
- 3.88in (98.5mm) tall
- 3.1in (78mm) deep (not including connector)
- Weight: 5 oz (142 grams)
- Enclosure Material: Lexan 940 Polycarbonate Plastic
- Enclosure Flame Rating: UL94 V0
Protocols
- HTTP, HTTPS, SSL, XML, Modbus TCP/IP, SNMP, SMTP, Remote Services
Logging
-
- Log File Size: 512K (up to 8,448 logs)
- Storage: Nonvolatile Flash
- Buffer Architecture: Circular Buffer
Log data can be periodically stored on a computer via FTP or email.
Advanced Features
- Task Builder
- BASIC interpreter
- Remote services
Password Settings
- Password Length: 6-18 Characters
Electromagnetic Compliance
- IEC CISPR 22, CISPR 24
- EU EN55024, EN55022
- X-410-I: FCC 47CFR15 (Class B)
- X-410-E: FCC 47CFR15 (Class A)
Product Safety Compliance
- IEC 61010-1
X-410 Datasheet x-410
X400 Series Video
