Description

About – Embedded with Paxton’s own video management software, the Paxton10 Vari-Focal Bullet Camera – PRO series is suitable for a range of environments. Ideal for wall mounting where surveillance cameras provide an effective deterrent.

The high performance PRO series provides 4K high-resolution video capture and 256GB of in-built memory to create a professional edge storage solution. Video is recorded on the camera’s built-in SD card. Video recordings can also be stored on an external network drive.

Use the Paxton10 Video Storage Calculator to determine how much storage you will need per camera on your Paxton10 system.

The Paxton10 PRO series cameras come with a 256GB SD card as standard. Please note, whilst the camera is covered by our 5-year warranty, the SD card is a consumable item and is therefore excluded from the guarantee.

Installation – Paxton10 cameras are equipped with the latest technology and our own video management software, eliminating the need for configuration. The cameras are directly connected to the network and will be visible in the Paxton10 Software under the devices menu. Add the camera to the system and name it as appropriate. No further configuration is required.

Operation – The Paxton10 cameras support a number of useful video management features, including:

• ‘Live View’ and recorded video
• Video export
• High-speed scrubbing
• Bookmarking
• Smart search
• Variable frame rate
• and more…

Every Paxton10 camera comes with Paxton’s standard 5-year hassle free guarantee. The plug-and-play hardware requires zero configuration, with immediate automatic recognition within the software, making installation and commissioning perfectly simple.

Datasheets:

TDS-0034-AE

TDS-0037-AE

Regulatory Information:

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

FCC conditions:

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
•  This device must accept any interference received, including interference that may cause undesired operation.

EU Conformity Statement:

This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

Power Supply:

The input voltage should conform to IEC60950-1 standard: SELV (Safety Extra Low Voltage) and the Limited Power Source. Refer to the appropriate documentation for detailed information. The standard power supply is 12 VDC, or PoE (802.3af), please make sure your power supply matches with your camera. DO NOT connect multiple devices to one power adapter, to avoid over-heating or re hazards caused by overload. Make sure the plug is properly connected to the power socket.

Environment:

Make sure the running environment meets the requirement of the device. The operating temperature shall be -30 °C to 60 °C (-22 °F to 140 °F), and the operating humidity shall be 90% or less (non- condensing). Do not place the camera in extremely hot, cold, dusty or damp locations, and do not expose it to high electromagnetic radiation.

Installation:

• Make sure the device is firmly secured to any wall or ceiling mountings. Be sure that there is enough space to install the camera and accessories.
• Make sure that the device in the package is in good condition and all the assembly parts are included.
• Make sure that the wall is strong enough to withstand at least 4 times the weight of the camera and the mount.
• Make sure that the power has been disconnected before you wire, install, or disassemble the device.
• Make sure that no reflective surface is too close to the camera lens. The IR light from the camera may reflect back into the lens causing reflection