Expansion Module 8 x Digital Inputs
8 Digital Inputs
Expansion Module for the X-400 or X-600M
- Description
- Features and Applications
- Specifications
- Downloads
Description
Security Sensors, Storage, Access Control, & More
A ControlByWeb X-400 or X-600M connected with an expansion module like the X-15S provides an easy, flexible, and reliable way to monitor and control systems and devices over a network. The X-15S is ideal for applications that can include the like of storage facilities, access control, and security. It’s great for monitoring door sensors, digital pulse meters, button/switch inputs, machine status, and much more.
X-15S Features
- 8 optically isolated digital inputs
- Digital input functions: Monitor State, Control Relays, Control Remote Relays, Count, Frequency, High Time, ON Time
- 8 LEDs for inputs 1-8
- Removable terminal connector
- Powered through expansion bus (no separate power supply connections are required)
Power Requirements
- Voltage: 9-28 VDC (supplied via the X-400 or X-600M controller, 24V recommended)
- Max Current: See table below for typical values at 25°C.
| Power Supply | All Opto-couplers OFF | All Opto-couplers ON |
|---|---|---|
| 9 VDC | 17 mA | 88 mA |
| 12 VDC | 13 mA | 66 mA |
| 24 VDC | 8 mA | 36 mA |
Digital Inputs
- Number of Inputs: 8
- Type: Optically-Isolated
- Voltage Range: 3-26VDC
- Current: 0.6mA @ 3V, 8.2mA @ 26V
- Minimum Hold Time: 2.5mS
- Input Isolation: 1500V
- Input Functions: Monitor State, Control Relays, Control Remote Relays, Count, Frequency, High Time, ON Time
- Maximum Count: 32-bit
- Max Count Rate: 200Hz
- Edge Trigger: Rising, Falling or Both
- High Time: Pulse width (4,194,304 seconds max)
- On Time: Accumulated time an input is asserted (4,194,304 seconds max)
- Frequency: 1Hz min, 200 Hz max
Connectors
- Inputs: 12-Position, 3.81mm terminal spacing, Removable. For 16-28 AWG wire.
- Expansion Connector: Ribbon cable, 10-conductor, polarized, 2×5-position, 0.100″ pitch Provides power and communications for expansion modules (Communications: RS-485)
LED Indicators
- Number of LEDs: 9
- Power on
- Digital Inputs 1-8
Physical
- Size:
- 1.41in (35.7mm) wide
- 3.88in (98.5mm) tall
- 3.1in (78mm) deep (not including connector)
- Weight: 4.8 oz (136 g)
- Enclosure Material: Lexan 940 Polycarbonate Plastic
- Enclosure Flame Rating: UL94 V0
Environmental
- Operating Temperature: -40°F to 150°F (-40°C to 65.5°C)
- Storage Temperature: -40°F to 185°F (-40°C to 85°C)
- Humidity: 5-95%, non-condensing
- Altitude: Up to 2,000m
- Indoor use or NEMA-4 protected location
Electromagnetic Compliance
- IEC CISPR 22, CISPR 24
- FCC 47CFR15 (Class B)
- EN55024 ITE Immunity (2010)
- EN55022 Emissions (2010)
Product Safety Compliance
- UL 61010-1 (Electrical Equipment for Measurement, Control, and Laboratory Use)
Datasheet x-15s
