Expansion Module Dual Relay High Current
Expansion Module 2 x K Thermocouples
SKU: X-600M-12S Categories: , Tags: , , , ,

Expansion Module 8 Relays

The ControlByWeb X-12s™ is an eight-relay expansion module and is used with an X-400™ or X-600M™ controller. The relays are 2.5A Form-A (SPST) with commons tied together in two groups. The removable terminal connector provides connections to the relays. One or more X-12s expansion modules can be connected with a ribbon cable that provides both power and communication via the BUS.

8 Relays

Expansion Module for the X-400 or X-600M

Add to wishlist

Description

Irrigation, Dry Contact Closures, & More

An X-400 or X-600M connected with an expansion unit such as the X-12S provides an easy, flexible, and reliable way to monitor and control systems and devices over a network. The X-12S has many applications but is a great fit in areas with moderate loads, including alarm panels, low-power LED lighting, and simple dry contact closures.

The X-12S Features

  • Eight large SPST relays (independently controlled)
    • Voltage: 125VAC, 30VDC
    • Current: 2.5A (total for each group of 4 relays with shared commons)
  • Removable connector
  • Eight Relay LEDs
  • Powered through expansion bus (no separate power supply connections are required)
Power Requirements
  • Voltage: 9-28 VDC (supplied via the X-400 or X-600M controller, 24V recommended)
  • Max Current: See table below for typical values at 25°C.
Power Supply All Relays OFF All Relays ON
9 VDC 16 mA 344 mA
12 VDC 12 mA 258 mA
24 VDC 7 mA 133 mA
Relay Contacts
  • Number of Relays: 8
  • Max Voltage: 125VAC, 30VDC
  • Max Current: 2.5A (total for each group of 4 relays with shared commons)
  • Contact Type: SPST (Form A)
  • Load Type: General Purpose
  • Contact Resistance: < 100 milliohms initial
  • Contact Material: AgNi
  • Electrical Life: 100K operations (Min)
  • Mechanical Life: 5M cycles (Min)
  • Environmental Rating: Over voltage Category II, Pollution Degree 2
  • Relay Modes: On/Off or Pulsed
  • Pulse Timer Duration: 0.1 to 86,400 Seconds (1-day)
Connectors
  • Relays: 14-Position, 3.81mm terminal spacing, Removable. For 16-28 AWG wire.
  • Expansion Connector: Ribbon cable, 10-conductor, polarized, 2Ă—5-position, 0.100″ pitch Provides power and communications for expansion modules (Communications: RS-485)
LED Indicators
  • Number of LEDs: 9
    • Power on
    • Relay coil energized 1-8
Physical
  • Size:
    • 1.41in (35.7mm) wide
    • 3.88in (98.5mm) tall
    • 3.1in (78mm) deep (not including connector)
  • Weight: 4.8 oz (136 g)
  • Enclosure Material: Lexan 940 Polycarbonate Plastic
  • Enclosure Flame Rating: UL94 V0
Environmental
  • Operating Temperature: -40°F to 122°F (-40°C to 50°C)
  • Storage Temperature: -40°F to 185°F (-40°C to 85°C)
  • Humidity: 5-95%, non-condensing
  • Altitude: Up to 2,000m
  • Indoor use or NEMA-4 protected location
Electromagnetic Compliance
  • IEC CISPR 22, CISPR 24
  • FCC 47CFR15 (Class B)
  • EN55024 ITE Immunity (2010)
  • EN55022 Emissions (2010)
Product Safety Compliance
  • UL 61010-1 (Electrical Equipment for Measurement, Control, and Laboratory Use)

The X12s Datasheet x-12s

Related Products

Add to wishlist
,

CBW - 4 Relay C / SPDT Expansion Module

Add to wishlist
,

CBW - 8 Channel Analogue Input Expansion Module

Add to wishlist
,

Expansion Module 8 x Analogue Inputs

Add to wishlist
,

Web Enabled PoE 4 A/D In + 2 I/O upto 16 1 wire se

Add to wishlist
,

Web-Enabled 8 Channel Digital Input Module 9-28Vdc or PoE